From: Nick Shah (nshah@xxxxxxxxxxxxxx)
Date: Wed Jan 09 2002 - 06:56:16 GMT-3
that seems to be a quirk, I have also seen it on a couple of my 25xx's It
seems that it interprets the Router prompt as a dns request , and in the
absence of any ip name-server command, tends to broadcast in an attempt to
get the ip address.
you can get over this behaviour by configuring no ip domain-lookup in config
mode. (do a write after that)
Nick
-----Original Message-----
From: Steven <adream@163.com>
To: ccielab <ccielab@groupstudy.com>
Date: Wednesday, 9 January 2002 8:09
Subject: why "Translating "Router"..." automatically whenever router starts
>I got a new 2621 router ,after i upgrade the ios,
>I reload the router ,then the following happens
>Router>Translating "Router"...domain server (255.255.255.255)
>I don't know why ?
>
>Thanks
>
>
>
>System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
>Copyright (c) 2000 by cisco Systems, Inc.
>C2600 platform with 65536 Kbytes of main memory
>
>
>Cisco Internetwork Operating System Software
>IOS (tm) C2600 Software (C2600-JS-M), Version 12.1(5), RELEASE SOFTWARE
(fc1)
>Copyright (c) 1986-2000 by cisco Systems, Inc.
>Compiled Wed 25-Oct-00 07:01 by cmong
>Image text-base: 0x80008088, data-base: 0x80FA7710
>
>cisco 2621 (MPC860) processor (revision 0x600) with 53248K/12288K bytes of
memory.
>Processor board ID JAD05390XQS (2833752893)
>M860 processor: part number 0, mask 49
>Bridging software.
>X.25 software, Version 3.0.0.
>SuperLAT software (copyright 1990 by Meridian Technology Corp).
>TN3270 Emulation software.
>2 FastEthernet/IEEE 802.3 interface(s)
>1 Serial network interface(s)
>32K bytes of non-volatile configuration memory.
>16384K bytes of processor board System flash (Read/Write)
>
>memory-size iomem 7
> ^
>% Invalid input detected at '^' marker.
>
>
>
>Press RETURN to get started!
>
>
>00:00:19: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
>00:00:19: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up
>00:00:19: %LINK-3-UPDOWN: Interface Serial0/0, changed state to down
>00:00:20: %SYS-5-CONFIG_I: Configured from memory by console
>00:00:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0,
changed state
> to down
>00:00:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1,
changed state
> to down
>00:00:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0,
changed state to do
>wn
>00:00:22: %LINK-5-CHANGED: Interface Serial0/0, changed state to
administratively down
>00:00:22: %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to
administratively
>down
>00:00:23: %SYS-5-RESTART: System restarted --
>Cisco Internetwork Operating System Software
>IOS (tm) C2600 Software (C2600-JS-M), Version 12.1(5), RELEASE SOFTWARE
(fc1)
>Copyright (c) 1986-2000 by cisco Systems, Inc.
>Compiled Wed 25-Oct-00 07:01 by cmong
>Router>Translating "Router"...domain server (255.255.255.255)
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:21 GMT-3