From: George Hansen (HansenG@xxxxxxxxxxxxxxxx)
Date: Tue Jan 08 2002 - 19:46:51 GMT-3
Thank you for the suggestions. Somehow Router B & Z were using the same ipx rou
ting xxxx.xxxx.xxxx command (most likely my clumsy cut-and-paste). I didn't not
ice I was pinging the same address at each end, because I was cuttting and past
ing it in. I finally noticed when I went to enter a static route on Z to B, Z c
laimed it could not enter a route to a local address.
I don't think split-horizon will keep the neighbor relationship from forming, b
ut it will affect which networks are advertised.
Thanks again,
George
>>> "fwells12" <fwells12@hotmail.com> 01/08/02 01:38PM >>>
Play around with this command on Z's subinterfaces...
no ipx split-horizon eigrp <AS#>
----- Original Message -----
From: "George Hansen" <HansenG@radiological.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, January 08, 2002 1:02 PM
Subject: Troubleshooting IPX EIGRP
> A have a router (Z) with two Frame Relay sub-interfaces connecting to
Router A and B. Router Z will not form an IPX EIGRP neighbor relationship
with Router B, but it will with Router A. Any suggestions on how to
debug/fix this?
>
> Router Z:
> interface Serial0.1 point-to-point
> ip address 10.31.26.6 255.255.255.252
> ipx network A4
> frame-relay interface-dlci 101
> interface Serial0.2 point-to-point
> ip address 10.63.26.6 255.255.255.252
> ipx network B4
> frame-relay interface-dlci 102
>
> IP EIGRP neighbor relationship with A and B.
> IPX EIGRP neighbor relationship with A, not B.
> Can ping A4.0001.0001.0001, and A4.FFFF.FFFF.FFFF
> Can ping B4.0001.0001.0001, NOT B4.FFFF.FFFF.FFFF
>
> RouterA:
> interface Serial0.1 point-to-point
> ip address 10.31.26.5 255.255.255.252
> ipx network A4
> frame-relay interface-dlci 101
>
> IP EIGRP neighbor relationship with Z.
> IPX EIGRP neighbor relationship with Z.
> Can ping A4.0002.0002.0002, and A4.FFFF.FFFF.FFFF
>
> Router B:
> interface Serial0.1 point-to-point
> ip address 10.63.26.6 255.255.255.252
> ipx network B4
> frame-relay interface-dlci 102
>
> IP EIGRP neighbor relationship with Z.
> NO IPX EIGRP neighbor relationship with Z.
> Can ping B4.0002.0002.0002, NOT B4.FFFF.FFFF.FFFF
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:20 GMT-3