From: Jim Brown (Jim.Brown@xxxxxxxxxxxxx)
Date: Tue Jan 08 2002 - 12:23:20 GMT-3
I was working through the very same problem last night. If you notice the
second requirement in the section , it requests router 1 be the root bridge?
If it is supposed to be the root bridge, this usually means transparent
bridging.
I think you and I know you can't bridge through a multipoint frame
interface. I think this is a major error in the text and would be very
interested in the solution when it arrives.
How did you solve the OSPF neighbor requirement between routers 1 and 4
without using the ip ospf network command?
-----Original Message-----
From: kyle prevey [mailto:preveyk@hotmail.com]
Sent: Tuesday, January 08, 2002 12:08 AM
To: ccielab@groupstudy.com
Subject: Question on Karl Solie's lab "Skynet"
I was cruising through this one and I hit a question that is asking me to
transparently bridge SNA from Vlan 1 to Vlan 3. First thing I thought of
was DLSW but there is a total separate section for DLSW. Not sure if it is
a trick question or I should use RSRB or something. Anyone know since the
solutions are not out yet? Brad Ellis wrote a review on the book so maybe
you can answer it for me.
Kyle
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:20 GMT-3