From: Bhisham Bajaj (bhishambajaj@xxxxxxxxx)
Date: Tue Jan 08 2002 - 11:37:21 GMT-3
If the route of the OSPF network has a different mask
than that of RIP
Then RIP interface will not advertise a Network that
has the sane major
Network as it has and have a different mask
U can define a route to null 0 for the network that u
want to advertise into
RIP with the same Mask os the RIP interface and then
redistribute static into RIP
HTH
Bhisham
--- DAN DORTON <DHSTS68@dhs.state.il.us> wrote:
> Try this.
>
> access-list 1 permit 172.16.1.27 0.0.0.15
> access-list 1 permit 172.16.1.17 0.0.0.15
>
> route-map ospf2rip permit 10
> match ip address 1
>
> router rip
> redistribute ospf 10 metric 2 route-map ospf2rip
>
> Good luck.
>
> Dan
>
>
> >>> Elias Udechime <euchime@yahoo.com> 01/08/02
> 08:00AM >>>
> Diagram was messed up. Rip is running only
> 172.168.x.X. look at it again.
> The netmask is /28
>
> I hope this helps. I have done distribute-list out,
> it
> did not work either. I do understand the problem
> with
> classless and classful. I guess the next trial would
> be Route Map.
>
> Thanks for your chipping in your suggestions.
>
>
> >
> > Topology:
> > | | Vlans
> > | Rip OSPF
> > |
> |172.16.1.0-15
> > 172.168.x.x LAN|----------Router1------|172.16.1
> -31
> >
> |172.16.1.-63
> > Also
> 10.1.1.1
> >
> >
> > There are many VLANs. I only want two VLANs to be
> > redistributed into RIP.
> >
> > I have tried access-list, distribute-list and
> > redistributed into Rip, this does not work. Could
> > some
> > shade more light--light.
> >
> > Sample config:
> >
> > Router ospf 10
> > network 172.16.1.0 0.0.0.255 area 0
> > network 10.0.0.0 0.0.255.255 area 0
> >
> > Router Rip
> > Network 172.168.1.0
> > Redistribute OSPF 10 metric 2
> > distribute-list 100 in
> >
> > Access-list 100 permit IP 172.16.1.27 0.0.0.15 any
> > Access-list 100 permit IP 172.16.1.17 0.0.0.15 any
> >
> > These are only two IP in two different VLANs I
> want
> > to
> > redistribute into RIP environment.
> >
> >
> > Elias
> >
> >
> >
> >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:20 GMT-3