From: tom cheung (tkc9789@xxxxxxxxxxx)
Date: Mon Jan 07 2002 - 20:25:38 GMT-3
Omar,
Cisco's recommendation is to configure cir to port speed and mincir to the
cir of your PVC. In the event of a BECN, traffic throttles back to mincir.
Tom
>From: "omar guarisco" <oguarisco44@hotmail.com>
>Reply-To: "omar guarisco" <oguarisco44@hotmail.com>
>To: ccielab@groupstudy.com
>Subject: FRTS ...CIR vs. MinCIR command
>Date: Mon, 07 Jan 2002 22:11:07
>
>With FRTS what is the difference configuring the CIR versus configuring the
>minCIR ???
>
>If I buy a Service from Provider which states that the PVC between Main
>Site
>A and Branch office B the CIR is 64 Kbit/s....I would configure on FRTS the
>CIR as 64....but what about MinCIR ???
>
>Tnx for the help
>Omar
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:19 GMT-3