From: fwells12 (fwells12@xxxxxxxxxxx)
Date: Mon Jan 07 2002 - 02:12:54 GMT-3
I don't understand your question. Explain it a little better.
----- Original Message -----
From: "Richard Geiger" <geiger_rich@hotmail.com>
To: <fwells12@hotmail.com>
Sent: Sunday, January 06, 2002 9:08 PM
Subject: Re: CAR- help 2 days to lab
>
>
> so on a 64KB line with a CIR or 64KB i would want that should allow only
the first 50% of an accesslist and drop I would want
>
> rate-limit input access-group 10 32000 (?) (?) conform-action
> > > transmit exceed-action drop
> I just dont get the math....
>
> Thanx for any help
>
>
>
>
>
> >From: "fwells12" <fwells12@hotmail.com>
> >To: "Richard Geiger" <geiger_rich@hotmail.com>, <ccielab@groupstudy.com>
> >Subject: Re: CAR- help 2 days to lab
> >Date: Sun, 6 Jan 2002 21:02:58 -0800
> >
> >The second number is committed burst and the third number is excess
burst.
> >Just like FRTS...
> >
> >
> >----- Original Message -----
> >From: "Richard Geiger" <geiger_rich@hotmail.com>
> >To: <ccielab@groupstudy.com>
> >Sent: Sunday, January 06, 2002 8:35 PM
> >Subject: CAR- help 2 days to lab
> >
> >
> > > rate-limit input access-group 10 10000000 24000 32000 conform-action
> > > transmit exceed-action drop
> > >
> > > Looking at the above statement, assume that you have a question that
says
> > > drop anything over 10MB. I understand that.
> > >
> > > But I can't find any reference on the next two numbers, the examples I
> >have
> > > seen do not have any mathmatical consistancy to the first number.
> > >
> > > If the question doesn't define the byte amounts how do you figure them
> > > out....
> > >
> > > -Rich
> > >
> > >
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:18 GMT-3