From: Giveortake@xxxxxxx
Date: Mon Jan 07 2002 - 01:29:49 GMT-3
Three routers R1 -R2- R3 connected via Serials
R3 runs IGRP 2 only
R2 runs EIGRP 1 and IGRP 2 and redistributes back and forth between them.
R1 runs EIGRP 1 only
R3 has Eth 0 that has IP address of 10.1.1.3/24
R4 has Loopback 0 that has IP address 200.0.0.3/32
When you look at routing table of R2 & R1 they show an external route of
10.0.0.0/8 and a 200.0.0.0/24. I know this is due to IGRP Classfull routing
protocal. The question is, is there a way to make it show up on R2 & R1 as
the true 10.1.1.0/24 and 200.0.0.3/32 that it is?
This is pulled more or less out of IPexpert IGRP-EIGRP lab. All my routers
(there are others in the scenerio I just didnt put them in to cloud the
issue) are able to ping all my other routers and my solution is matching that
which IpExpert has, just concerned that I should be trying to get that
10.1.1.0/24 and the 200.0.0.4/32 to propagate to R2 & R1 as that which they
really are vs their classess.....
David
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:18 GMT-3