From: Chris Larson (clarson52@xxxxxxxx)
Date: Sun Jan 06 2002 - 15:10:10 GMT-3
I am working off the ccboot lab 3. I have setup my netbios access-list excpet
I am using LAB1 instead of CCIELAB as I have a real station called lab 1 off
of R3 ethernet. (My r3 is ethernet instead of Token and my R4 is token instead
of ether).
I have gone as far as creating a netbios access list that is a deny * on BOTH
routers but my netbios names stil show up ???. The config is posted below. Can
someone enlighten me??
Osing ios 12.07t Etnerprise IPSEC 56
hostname R3
!
netbios access-list host r3 deny LAB1
netbios access-list host r3 deny *
!
memory-size iomem 20
clock timezone eastern -5
ip subnet-zero
no ip domain-lookup
!
ipx routing 0003.0003.0003
!
dlsw local-peer peer-id 137.20.13.3
dlsw remote-peer 0 tcp 137.20.20.1 host-netbios-out r3
dlsw remote-peer 0 tcp 137.20.23.4 lsap-output-list 201 host-netbios-out r3
dlsw bridge-group 1
!
interface FastEthernet0/0
ip address 137.20.13.3 255.255.255.0
no ip directed-broadcast
ipx network 310
ipx type-20-propagation
bridge-group 1
hostname R4
!
netbios access-list host r4 deny *
!
ip subnet-zero
no ip domain-lookup
ipx routing 0004.0004.0004
!
!
!
source-bridge ring-group 2000
dlsw local-peer peer-id 137.20.23.4
dlsw remote-peer 0 tcp 137.20.20.1 host-netbios-out r4
dlsw remote-peer 0 tcp 137.20.13.3 lsap-output-list 201 host-netbios-out r4
!
interface TokenRing0
ip address 137.20.23.4 255.255.255.0
no ip directed-broadcast
ipx network 400
ipx type-20-propagation
ring-speed 16
source-bridge 1 1 2000
source-bridge spanning
!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:17 GMT-3