From: omar guarisco (oguarisco44@xxxxxxxxxxx)
Date: Fri Jan 04 2002 - 09:31:47 GMT-3
HI Tom,
this is normal if you're not using FR inverse-arp...when configuring static
map on a router you can't ping itself unless you add a static map...this
happen because router could not associate dynamically the local ip address
on R5 to a dlci ...
Hope this helps
Omar
>From: biglaomao@sohu.com
>Reply-To: biglaomao@sohu.com
>To: <ccielab@groupstudy.com>
>Subject: ccbootcamp lab 2 ping every interface
>Date: Thu, 3 Jan 2002 19:04:40 +0800 (CST)
>
> hi all:
> in lab 2, also in lab1, the result is required ping every interface,
>but when i ping one interface which is encapsulated by frame-relay in one
>router itself, i can't ping success, for example in lab 2 i can't ping
>10.10.1.5 in r5, i must add a frame-map in this router map 10.10.1.5 to
>dlci 501, it can ping success,i think this is no significance , but if i
>can't do like this ,i can't ping 10.10.1.5 , can't get correct result of
>this exercise!
> thank you!
> tom
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:15 GMT-3