From: tom cheung (tkc9789@xxxxxxxxxxx)
Date: Thu Jan 03 2002 - 18:27:40 GMT-3
Rob,
Dialer remote name is typically used for dialer interfaces. The name you
specify here will have to match your ISDN peer's name. If you're peering
with r1, then it'll be "dialer remote-name r1". If your peer is using
alternate name, then you'll specify the alternate name.
Tom
>From: "Rob Rummel" <Rummel@Hawaii.rr.com>
>Reply-To: "Rob Rummel" <Rummel@Hawaii.rr.com>
>To: <ccielab@groupstudy.com>
>Subject: ISDN Dialer remote-name
>Date: Thu, 3 Jan 2002 10:44:03 -1000
>
>Spent all morning on this and I'm not quite sure of the use for Dialer
>remote-name
>Ppp chap hostname lets you use alternate hostname and the other side
>must have
>That username and password configured for that alternate
>So how does remote-name fall into the ppp authentication.
>I have looked over Caslow and the CCO and still don't get it.
>
>
>
>6 days to go and I'm starting to loose my mind.....
>
>
>
>
>Rob Rummel
>
>
>
>-The faulty interface lies between the chair and the keyboard-
>
>[GroupStudy.com removed an attachment of type image/gif which had a name of
>image001.gif]
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:15 GMT-3