From: Larson, Chris (Contractor) (Chris.Larson@xxxxxx)
Date: Thu Jan 03 2002 - 10:46:10 GMT-3
I have used the Lantronix in the past for console access to the routers. I
believe we used a straight thru cable. I do not quite remember, but keep
working at it because I know it works and it is a great product. Try a
straight cable with rj45 and then roll it if that does not work.
Also, when you do a show port, be sure and set the Access to either remote
or dynamic. If the access is set to local it won't work for telnetting to
routers. Also, port 0 is the telnet port but I do not believe there is any
need to change anything with port 0.
Lastly, try another telnet program if you are using the windows based. I
seem to rememebr some issue there. We used procomm.
-----Original Message-----
From: Bryan Long (Richmond VA) [mailto:bryaninrichmond@hotmail.com]
Sent: Wednesday, January 02, 2002 7:30 PM
To: ccielab@groupstudy.com
Subject: Lantronix terminal server
Anyone using a Lantronix terminal server have some words of advice? I still
have not been able to connect to a cisco console port. I have configured IP
and set the port speeds but no luck so far...
Thanks!
Bryan
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:15 GMT-3