From: Frei Peter (Peter.Frei@xxxxxxxx)
Date: Thu Jan 03 2002 - 09:38:12 GMT-3
Hi
On R6 I did area 0 range 140.4.4.0 255.255.255.0, which has worked for me
with 12.1.11.
I have still a problem to get the ISDN route 140.4.56.0/30 int IGRP. Red
connected into OSPF and summary-address works only if I allow the peer
neighbor route for the ISDN ppp-connection. (But with that the ISDN goes
always up and down). The flapping of the ISDN can also be stopped with
matching th ip address insted aof the interface in the route-map
connectedtoospf. But with that, I have also no summary-route with 24bit
mask.
Any suggestions beside of secondary addresses on the IGRP link wit /30 mask.
Peter
-----Urspr|ngliche Nachricht-----
Von: chophin [mailto:chophin@yahoo.com]
Gesendet: Mittwoch, 2. Januar 2002 06:11
An: ccielab@groupstudy.com
Betreff: bootcamp 19 ospf redis into igrp
Hi group,
Bootcamp 19 IGRP task: "redis between IGRP and OSPF" on R6.
The other networks have no problem except the VALNA 140.4.4.0/25 which
is R6's connect network.
In the formerly version IOS, it can be can by redis connect into ospf,
then do a summary.
But after 12.1 IOS it seem can't do it by this way. Do you know how to
do it?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:14 GMT-3