From: saher A Ishak (saher@xxxxxxxxxxxxx)
Date: Wed Jan 02 2002 - 06:20:37 GMT-3
hi chris ;
try this link
http://www.cisco.com/warp/public/471/snapshot_2.html
sample scenario with configuration
cheers
saher
----- Original Message -----
From: Christian C. Aguillo <chris_aguillo@alfalak.com>
To: saher A Ishak <saher@synergyct.com>
Sent: Wednesday, January 02, 2002 11:09 AM
Subject: Re: "broadcast" keyword in Dialer Map
> can you send some configs..... Thanks
>
> Chris
> ----- Original Message -----
> From: "saher A Ishak" <saher@synergyct.com>
> To: <ccielab@groupstudy.com>
> Sent: Wednesday, January 02, 2002 8:57 AM
> Subject: Re: "broadcast" keyword in Dialer Map
>
>
> > hi Group
> >
> > My name is Saher Amir Ishak
> >
> > Iam from Egypt
> >
> > I have finished my Sylvan preparing for my lab
> > It will be in Halifax after 4 month from now
> >
> >
> > Wish u all a happy new year and achieving all your targets
> >
> > about Paul question
> >
> > the only way to do it is to remove the Broadcast command from the Dialer
> map
> >
> > then use Snapshot routing ===> u can only use snap shot routing for
> > Distance vector protocols
> >
> > if u need more info I can send u some configurations
> >
> >
> > Good luck
> >
> >
> > saher A Ishak
> >
> > CCNP , security Specialist , Internet Specialist , CCSI 22655
> >
> >
> > ----- Original Message -----
> > From: Paul Loh <smallfly77777@yahoo.com>
> > To: <ccielab@groupstudy.com>
> > Sent: Wednesday, January 02, 2002 6:59 AM
> > Subject: "broadcast" keyword in Dialer Map
> >
> >
> > > Hi,
> > >
> > > Will the "broadcast" keyword in the "dialer map"
> > > command keeps the ISDN link always up when running
> > > IGRP? Assuming that I did not put the IGRP updates as
> > > interesting traffic in my dialer-list.
> > >
> > > Any advise is appreciated. Thanks in advance.
> > >
> > > Regards,
> > > Paul
> > >
> > > =====
> > > Thank-you.
> > > Regards,
> > > Paul
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:14 GMT-3