From: tom cheung (tkc9789@xxxxxxxxxxx)
Date: Fri Dec 28 2001 - 12:58:51 GMT-3
Group,
This is an Out of Topic question.
Can a remote router which is connected to the central site via IPSec tunnel
be SNMP managed? I'm having trouble to get this to work. This remote
router has the usual snmp community strings and traps defined. But debug
SNMP do not show any SNMP GETs from the management station. What am I
missing here? I've attached SNMP configs and show snmp output below:
snmp-server community ....... RO
snmp-server community ....... RW
snmp-server trap-source Loopback0
snmp-server location
snmp-server chassis-id .........
snmp-server enable traps snmp authentication linkdown linkup coldstart
warmstart
snmp-server enable traps config
snmp-server host xxxxxx ........ snmp
>sh snmp
Chassis: xxxxxxxxx
0 SNMP packets input
0 Bad SNMP version errors
0 Unknown community name
0 Illegal operation for community name supplied
0 Encoding errors
0 Number of requested variables
0 Number of altered variables
0 Get-request PDUs
0 Get-next PDUs
0 Set-request PDUs
18 SNMP packets output
0 Too big errors (Maximum packet size 1500)
0 No such name errors
0 Bad values errors
0 General errors
0 Response PDUs
18 Trap PDUs
SNMP logging: enabled
Logging to x.x.x.x.162, 0/10, 4 sent, 0 dropped.
Logging to y.y.y.y.162, 0/10, 4 sent, 0 dropped.
Logging to z.z.z.z.162, 0/10, 10 sent, 0 dropped.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:49 GMT-3