From: Bryan Osoro (bosoro@xxxxxxxxxxx)
Date: Thu Dec 27 2001 - 01:35:56 GMT-3
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/
ip_c/ipcprt2/1cdigrp.htm#xtocid2222614
<watch for wrap>
Split horizon is your answer, did you do a clear ip route * on every
router? Or at least the routers involved.
And you have No Auto-summary on right?
Try that
Bryan
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jeongwoo Park
Sent: Wednesday, December 26, 2001 8:51 PM
To: 'albert_ccie@yahoo.com'; ccielab@groupstudy.com
Subject: RE: Eigrp secondary address not being advertised !!
The secondary ip addresses are still not being learned by the other
router
even after "no ip split-horizon"
any other idea?
Anyway thanks for the reply Albert.
JP
-----Original Message-----
From: Albert Lu [mailto:albert_ccie@yahoo.com]
Sent: Wednesday, December 26, 2001 7:39 PM
To: 'Jeongwoo Park'
Cc: ccielab@groupstudy.com
Subject: RE: Eigrp secondary address not being advertised !!
A hint: "split horizon"
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Jeongwoo Park
Sent: Thursday, December 27, 2001 2:20 PM
To: 'ccielab@groupstudy.com'
Subject: Eigrp secondary address not being advertised !!
I have the following situation: On a 4500 (Router A) ethernet interface
I
have the following addresses:
172.18.114.1 secondary
172.18.115.1 secondary
172.18.116.1
all masks are 24 bits
On the ethernet segment another router (Router B) with address
172.18.116.50
with mask 24 bits. Both are running EIGRP and the process number is the
same. Problem: Router B has all networks from Router A except for those
declared as secondary addresses. Why is this? How can I see all
secondary
addresses configured in Router A at Router B's routing table?
Thanks in advance.
JP
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:48 GMT-3