From: Tony Kandaya (katkan@xxxxxxxxxxx)
Date: Tue Dec 25 2001 - 17:19:49 GMT-3
Hi Tom,
Thanks for the link, this is excatly what I was looking for.
Tony
----- Original Message -----
From: "tom cheung" <tkc9789@hotmail.com>
To: <katkan@prodigy.net>; <ccielab@groupstudy.com>
Sent: Tuesday, December 25, 2001 2:23 PM
Subject: Re: Pinout for RJ48-RJ48
> Tony,
> The following link has pinouts you're looking for. Typical RJ48 for T-1
> circuits uses pin 1,2 for receive and 4,5 for transmit.
>
>
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/cis2500/2524/
boa/boapin.htm#xtocid9049
>
>
>
>
> >From: "Tony Kandaya" <katkan@prodigy.net>
> >Reply-To: "Tony Kandaya" <katkan@prodigy.net>
> >To: <ccielab@groupstudy.com>
> >Subject: Pinout for RJ48-RJ48
> >Date: Tue, 25 Dec 2001 13:56:33 -0500
> >
> >Hi Group,
> >
> > I have a situation where the CD will not come up on a 2524 router
with
> >a
> >FT1/T1 CSU/DSU WIC. When an RJ48 Straight through is attached on the WIC
> >but
> >NOT on the wall Demarc the CD comes up, but as soon as you plug the other
> >end
> >into the Wall Jack I get an AIS alarm. Any suggestions are welcomed.
> >
> >Thanks
> >Tony Kandaya
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:47 GMT-3