From: Annu (annu_roopa@xxxxxxxxx)
Date: Sun Dec 23 2001 - 19:19:47 GMT-3
Thanks for u answers.
The max is 600 seconds and min is 30 seconds.
Default of 5 mts (300 seconds).
This is what i was reading and understanding further
(for further reading).
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/fun_r/fr
prt3/frgenral.htm#xtocid2506316
--- tom cheung <tkc9789@hotmail.com> wrote:
> The max load-interval is 600 seconds.
>
>
> >From: "Basel Tashkandi" <basel@tashkandi.com>
> >Reply-To: <basel@tashkandi.com>
> >To: "tom cheung" <tkc9789@hotmail.com>,
> <kenairs@hotmail.com>,
> ><ccielab@groupstudy.com>
> >Subject: RE: to set the interval in ' show
> interface'
> >Date: Sun, 23 Dec 2001 23:57:29 +0300
> >
> >apologies
> >yes you are right. so what is the max you can set
> it too?
> >
> >
> >-----Original Message-----
> >From: tom cheung [mailto:tkc9789@hotmail.com]
> >Sent: 23 December 2001 23:51
> >To: basel@tashkandi.com; kenairs@hotmail.com;
> ccielab@groupstudy.com
> >Subject: RE: to set the interval in ' show
> interface'
> >
> >
> >No. I do believe the minimum interval is 30
> seconds.
> >
> >
> > >From: "Basel Tashkandi" <basel@tashkandi.com>
> > >Reply-To: "Basel Tashkandi" <basel@tashkandi.com>
> > >To: "kenairs" <kenairs@hotmail.com>,
> <ccielab@groupstudy.com>
> > >Subject: RE: to set the interval in ' show
> interface'
> > >Date: Sun, 23 Dec 2001 19:04:12 +0300
> > >
> > >i believe the minimum you can set the timers too
> is 5 min
> > >
> > >regards
> > >
> > >--- kenairs <kenairs@hotmail.com> wrote:
> > > > Hi ,
> > > > I remember someone from here saying we can set
> the
> > > > interval from the load to a
> > > > shorter time instead of the 5 minutes.
> > > >
> > > > #show interface ...
> > > >
> > > > Tks
> > > >
> >
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:47 GMT-3