From: kenairs (kenairs@xxxxxxxxxxx)
Date: Sun Dec 23 2001 - 15:18:31 GMT-3
Hi ,
I am aware what the command does.
But R4 is not doing any redistribution , So i do think that is need here.
But the funny things is that , R4 need this command to prevent routing
loops. ???
----- Original Message -----
From: tom cheung <tkc9789@hotmail.com>
To: <kenairs@hotmail.com>; <ccielab@groupstudy.com>
Cc: <mrussell@ccbootcamp.com>
Sent: Sunday, December 23, 2001 10:11 PM
Subject: Re: Lab 20. Redistribution between OSPF and IGRP
> Don't have lab 20 in front of me. But the distribution list 1 out
statement is to restrict only routes that satisfy access-list 1 to be
injected from igrp into ospf. If there's mutual redistribution between ospf
and igrp, this could prevent feedback loop.
>
>
> >From: "kenairs" <kenairs@hotmail.com>
> >Reply-To: "kenairs" <kenairs@hotmail.com>
> >To: <ccielab@groupstudy.com>
> >CC: <mrussell@ccbootcamp.com>
> >Subject: Lab 20. Redistribution between OSPF and IGRP
> >Date: Sun, 23 Dec 2001 12:56:47 +0800
> >
> >Hi ,
> >I was doing the redistribution between IGRP and OSPF.
> >I noticed on R4 , the conifig is below.
> >
> >router igrp 1
> > redistribute mobile metric 1000 100 255 1 1500
> > network 150.10.0.0
> > distribute-list 1 out igrp 1 ------------ > what does this command
do ?
> >
> >access-list 1 permit 150.10.4.0 0.0.0.255
> >access-list 1 permit 150.10.45.0 0.0.0.255
> >access-list 1 permit 150.10.40.0 0.0.0.255
> >
> >From what i understand , this is to restrict the routes source from IGRP
1
> >when redistribute to igrp 1 ????
> >
> >Please help to clarify .
> >Tks
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:46 GMT-3