From: Michael Popovich (m.popovich@xxxxxxxx)
Date: Sat Dec 22 2001 - 18:25:06 GMT-3
Doing dialer profiles on this lab. It is remote so I am not sure what kind of
ISDN switch it is but I think it is Teltone.
Here is the configs.
R5
username r6 password 7 121A0C041104
interface BRI0/0
no ip address
no ip directed-broadcast
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-ni
isdn spid1 0835866101 8358661
isdn spid2 0835866301 8358663
ppp multilink
interface Dialer1
ip address 150.100.100.2 255.255.255.0
no ip directed-broadcast
encapsulation ppp
dialer string 8358662
dialer pool 1
dialer-group 1
ppp authentication chap
ppp chap hostname r5
ppp chap password 7 cisco
access-list 1 permit any
dialer-list 1 protocol ip list 1
R6
username r5 password 7 045802150C2E
interface BRI0
no ip address
no ip directed-broadcast
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-ni
isdn spid1 0835866201 8358662
isdn spid2 0835866401 8358664
ppp multilink
interface Dialer1
ip address 150.100.100.3 255.255.255.0
no ip directed-broadcast
encapsulation ppp
dialer in-band
dialer string 8358661
dialer-group 1
ppp authentication chap
ppp chap hostname r6
ppp chap password 7 cisco
access-list 1 permit any
dialer-list 1 protocol ip list 1
Debug on R6 after trying to ping 150.100.100.2 (Dialer interface on R5) from
R6. (ISDN Q931)
10:30:41: ISDN BR0: RX <- SETUP pd = 8 callref = 0x19
10:30:41: Bearer Capability i = 0x8890
10:30:41: Channel ID i = 0x89
10:30:41: Signal i = 0x40 - Alerting on - pattern 0
10:30:41: ENDPOINT IDent i = 0x8281
10:30:41: Calling Party Number i = 'A', 0x81, '8358661'
10:30:41: Called Party Number i = 0xC1, '8358662'
10:30:41: ISDN BR0:1: Incoming call rejected, unbindable
10:30:41: ISDN BR0: TX -> RELEASE_COMP pd = 8 callref = 0x99
10:30:41: Cause i = 0x8095 - Call rejected
Any ideas on this?
Michael Popovich
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:46 GMT-3