From: Erick B. (erickbe@xxxxxxxxx)
Date: Sat Dec 22 2001 - 03:15:48 GMT-3
Hi,
What PA's are in this VIP? I've seen similar errors
with the traceback when a router was running a IOS
that didn't support the PA's/modules installed.
Putting the right IOS on fixed the problem. Your case
may vary though.
I'd run all the modules through the HW/SW matrix.
--- Hotmail <jthao1@hotmail.com> wrote:
> Hello group,
>
> Does anyone have any idea what the following
> RSM/VIP2 error might be:
> Anyone that can point me to the right direction in
> trying to research this
> would be appreciated.
>
> I get the following bootup messages:
>
> System Bootstrap, Version 11.2(17523) [mohsen 102],
> INTERIM SOFTWARE
> Copyright (c) 1994-1997 by cisco Systems, Inc.
>
> SLOT 7 C5RSP is system master
> C5RSP processor with 131072 Kbytes of main memory
>
>
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
> CCCCCCCCCCCCCCCCCCCCCCCC
> CCCCCCCCCCCCCCCCCCC
> Self decompressing the image :
>
#####################################################################
>
############################################################################
> ########################
>
###################################################################
> [OK]
>
> 00:00:34: %SYS-3-LOGGER_FLUSHING: System pausing to
> ensure console debugging
> output.
>
> %DBUS-3-SW_NOTRDY: DBUS software not ready after
> dbus_slot_enable(), elapsed
> 12032, status 0x48
> -Traceback= 60208BD4 60209C20 6021B304 60213098
> 601CA16C 60143244 601434B0
> 601B0F8C 601B0F78
> 00:00:44: %SYS-3-LOGGER_FLUSHING: System pausing to
> ensure console debugging
> output.
>
> %CBUS-3-CCBPTIMEOUT: CCB handover timed out, CCB
> 0x5800FFB0, slot 9
> -Traceback= 6021D580 6021AE68 6021B3F0 60213098
> 601CA16C 60143244 601434B0
> 601B0F8C 601B0F78
> 00:00:47: %SYS-3-LOGGER_FLUSHING: System pausing to
> ensure console debugging
> output.
>
>
> Does anyone know what the CBUS-3 error is, and how
> to fix it. Is this a
> hardware problem or a software incompatibility. I
> got this when I installed
> the VIP2-40 to my RSM.
>
>
> Joseph
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:46 GMT-3