From: Marc Russell (mrussell@xxxxxxxxxxxxxx)
Date: Sat Dec 22 2001 - 01:27:00 GMT-3
Do you have at least the basic config below on your router?
interface ATM0/0
no ip address
no ip directed-broadcast
atm pvc 1 0 5 qsaal
atm pvc 2 0 16 ilmi
no atm ilmi-keepalive
no shut
Marc Russell
www.ccbootcamp.com
-----Original Message-----
From: sdecker@bellsouth.net
To: ccielab@groupstudy.com
Sent: 12/21/01 6:03 PM
Subject: LS1010/router integration
Hi list:
I'm fortunate enough to have just procured an LS1010 for my lab. It's
my understanding that its default configuration should allow auto-config
to occur. However, when I go to my connected router interface and set
it for auto-config, all interfaces show up/up but 'show atm int' on the
LS1010 says 'waiting for response from peer'. Am I doing something
wrong? Just another one of many questions from an ATM newbie. ;-)
TIA,
Scott
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:46 GMT-3