From: Ajaz Nawaz (anawaz@xxxxxxxxx)
Date: Wed Dec 19 2001 - 08:00:22 GMT-3
1751 at minimum for 802.1q
http://www.cisco.com/univercd/cc/td/doc/pcat/1750.htm#ov
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
fwells12
Sent: 18 December 2001 23:19
To: Ryaboy Vadim; ccielab@groupstudy.com
Subject: Re: Trunking with 2901 switch
2501 will not trunk. You will need a 2620 at minimum. Trnking requires a
100Mb ethernet interface.
----- Original Message -----
From: "Ryaboy Vadim" <VRyaboy@acuson.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, December 18, 2001 3:05 PM
Subject: Trunking with 2901 switch
> Is it possible to set trunking between 2901 switch and 2501 router ?
>
> Can not get trunking to work. It shows status not-trunking.
>
> I've tried different ports, read all groupstudy and cisco
>
> web site ,but could not find relevant info.
>
> Seems 2901 is limited in trunk setup. But it has set trunk command. So,
>
> it should be possible to set up trunking, right?
>
> Any comments, examples ?
>
> Anybody successfully configured router-on-stick with 2901 and 2500 series
> router?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:45 GMT-3