Re: ATM connect back to back

From: kym blair (kymblair@xxxxxxxxxxx)
Date: Fri Dec 14 2001 - 00:27:02 GMT-3

Next message: Menga, Justin: "RE: Can't get translational bridging to work also!!"
Previous message: Kevin: "ATM connect back to back"
Maybe in reply to: Kevin: "ATM connect back to back"
Next in thread: Chua, Parry: "RE: ATM connect back to back"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Kevin,

Yes, no problem. Here is a config:

ROUTER1:

interface ATM0
ip address 10.10.10.1 255.255.255.0
pvc 6/102
  protocol ip 10.10.10.1 broadcast
  protocol ip 10.10.10.2 broadcast
  encapsulation aal5snap
!
atm clock INTERNAL
no atm ilmi-keepalive

ROUTER2:

interface ATM0
ip address 10.10.10.2 255.255.255.0
pvc 6/102
  protocol ip 10.10.10.1 broadcast
  protocol ip 10.10.10.2 broadcast
  encapsulation aal5snap
!
atm clock INTERNAL
no atm ilmi-keepalive

HTH, Kym

>From: Kevin <kevin@btamail.net.cn>
>Reply-To: Kevin <kevin@btamail.net.cn>
>To: "ccielab@groupstudy.com" <ccielab@groupstudy.com>
>Subject: ATM connect back to back
>Date: Fri, 14 Dec 2001 11:7:1 +0800
>
>Hello all, does the two atm ports connect directly through back to back
>fibre cable?

Next message: Menga, Justin: "RE: Can't get translational bridging to work also!!"
Previous message: Kevin: "ATM connect back to back"
Maybe in reply to: Kevin: "ATM connect back to back"
Next in thread: Chua, Parry: "RE: ATM connect back to back"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:43 GMT-3