From: David C Prall (dcp@xxxxxxxxxxx)
Date: Thu Dec 13 2001 - 21:40:30 GMT-3
Chad,
These are the interfaces that a number of the earlier routers had, IGS 2000
3000 4000. You can get cables from http://www.pacificcable.com
David C Prall dcp@dcptech.com http://dcp.dcptech.com
----- Original Message -----
From: "Chad Allison" <chad.allison@mindspring.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, December 13, 2001 6:15 PM
Subject: IGS router/bridge
> All,
>
> I acquired an old IGS router when I purchased a friend's bundle of CCIE
> prep equip. Anyway, it's running ios 9.0(1). Hold the laughter
> please... It has an ethernet int which will be good for something I
> guess. Also, it has a serial. Not a standard 60-pin but it's actually
> 50-pin. It looks like a fat DB-25. Does anyone have a clue where I can
> get a cable for this or what the hell it's called? Ideally I could go
> back-to-back with one of my 2500s which, of course, means I would be
> going from this 50-pin freak interface to a standard Cisco 60-pin
> serial. Is this possible?
>
> Any input would be much appreciated!
>
> Chad Allison
> Sr. Network Engineer
> CCNP, CCDP
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:43 GMT-3