From: Emenike Agbim (emenike.agbim@xxxxxxxxxxxx)
Date: Thu Dec 13 2001 - 18:53:55 GMT-3
When I configure Ospf area range command, the specific addresses which I
have summarized are sent to the neighbor router within the same area? This
behavior is revealed both when "....advertised" and ".....not advertised" is
used with the "area range ...." command. Why? See config below
Router A
interface Loopback20
ip address 10.0.0.1 255.255.0.0
no ip directed-broadcast
!
interface Loopback21
ip address 10.1.0.1 255.255.0.0
no ip directed-broadcast
!
interface Loopback22
ip address 10.2.0.1 255.255.0.0
no ip directed-broadcast
!
interface Loopback23
ip address 10.3.0.1 255.255.0.0
no ip directed-broadcast
!
interface Loopback24
ip address 10.4.0.1 255.255.0.0
no ip directed-broadcast
!
interface Loopback25
ip address 10.5.0.1 255.255.0.0
no ip directed-broadcast
!
interface Loopback26
ip address 10.6.0.1 255.255.0.0
no ip directed-broadcast
!
interface Loopback27
ip address 10.7.0.1 255.255.0.0
no ip directed-broadcast
area 192.168.10.0 range 10.0.0.0 255.248.0.0 not-advertise
Router B show ip route
O 10.3.0.1 [110/2] via 192.168.10.1, 00:03:04, FastEthernet0/0
O 10.2.0.1 [110/2] via 192.168.10.1, 00:03:06, FastEthernet0/0
O 10.1.0.1 [110/2] via 192.168.10.1, 00:03:06, FastEthernet0/0
O 10.0.0.1 [110/2] via 192.168.10.1, 00:03:06, FastEthernet0/0
O 10.7.0.1 [110/2] via 192.168.10.1, 00:03:06, FastEthernet0/0
O 10.6.0.1 [110/2] via 192.168.10.1, 00:03:06, FastEthernet0/0
O 10.5.0.1 [110/2] via 192.168.10.1, 00:03:06, FastEthernet0/0
O 10.4.0.1 [110/2] via 192.168.10.1, 00:03:06, FastEthernet0/0
Thanks for your response
Emenike Agbim, PE, CCNP
Network Engineer
Adelphia Business Solution
(814) 260 3123
emenike.agbim@adelphia.com <mailto:emenike.agbim@adelphia.com>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:43 GMT-3