From: Albert Lu (albert_ccie@xxxxxxxxx)
Date: Wed Dec 12 2001 - 17:57:40 GMT-3
Richard,
Isn't that only needed if you have the DLSW priority option turned on?
Otherwise it is all piped through port 2065, rather than using 2065(high)
1981(med) 1982(normal) 1983(low)?
What does port 2067 do?
Albert
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Richard Gallagher
Sent: Thursday, December 13, 2001 3:13 AM
To: David Vu; ccielab@groupstudy.com
Subject: Re: Custom queue-list for DLSW
David,
"dlsw" keyword is only for FST encapsulation, for TCP you need to specify
all
the ports involved.
Rich
CCIE #7211
On Dec 12, 9:38am, David Vu chatted about:
> Subject:Custom queue-list for DLSW
> In bootcamp lab 20, it asks you to do a custom queue with
>
> 50% on DLSW
> 25% on IP
> 25% on IPX
>
> For DLSW, the solution is
> access-list 101 permit tcp any eq 2065 any
> access-list 101 permit tcp any any eq 2065
> access-list 101 permit tcp any any eq 2067
> access-list 101 permit tcp any any eq 1981
> access-list 101 permit tcp any any eq 1982
> access-list 101 permit tcp any any eq 1983
> queue-list 1 protocol ip 1 list 101
>
> Would it be easier to do "queue-list 1 protocol dlsw 1" instead of using
an
> access-list?
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:42 GMT-3