Re: ccboot 2 bgp AS3 challenge

From: EA Louie (elouie@xxxxxxxxx)
Date: Wed Dec 12 2001 - 13:23:39 GMT-3


   
I'll try it too when I get back around to this lab. Otherwise, my solutions
used the existing routing protocols.

----- Original Message -----
From: "Chris Larson" <clarson52@home.com>
To: "EA Louie" <elouie@yahoo.com>; <ccielab@groupstudy.com>
Sent: Wednesday, December 12, 2001 3:41 AM
Subject: Re: ccboot 2 bgp AS3 challenge

> Icmp router discovery protocol and gateway discovery protocol. I am
guessing
> that maybe if this works there are 3 solutions.
>
> IRDP is cool. It advertises out the interface you specify at intervals you
> specify. On the other side you run gateway discovery protocol and it
listens
> for the IRDP. Once it here's the irdp it enters the ip address of the
> advertising irdp as it's default gateway.
>
> Thinking about it this morning though, I have never tried advertisements
> from different interfaces to a router. I have tried advertising from 2
> routers of the same ethernet and setting priority so they both end up as
> defaults. I dunno if it would work but I am goin to try it when I have
time.
>
>
>
>
> ----- Original Message -----
> From: "EA Louie" <elouie@yahoo.com>
> To: "Chris Larson" <clarson52@home.com>; <ccielab@groupstudy.com>
> Sent: Wednesday, December 12, 2001 2:53 AM
> Subject: Re: ccboot 2 bgp AS3 challenge
>
>
> > I don't understand the abbreviations...
> >
> > IRDP? internal route distribution protocol?
> >
> > GDP? general data processing?
> >
> > ----- Original Message -----
> > From: "Chris Larson" <clarson52@home.com>
> > To: "EA Louie" <elouie@yahoo.com>; <ccielab@groupstudy.com>
> > Sent: Tuesday, December 11, 2001 8:00 PM
> > Subject: Re: ccboot 2 bgp AS3 challenge
> >
> >
> > > Well, I will take a stab at one of the solutions I can think of off
the
> > top
> > > off my head. I think this would work, I will have to put it to the
test
> in
> > > the lab.
> > >
> > > IRDP on R5 GDP on R6 facing R5. IRDP on R6 facing R7 GDP on R7 facing
> R6.
> > >
> > >
> > > ----- Original Message -----
> > > From: "EA Louie" <elouie@yahoo.com>
> > > To: <ccielab@groupstudy.com>
> > > Sent: Tuesday, December 11, 2001 8:57 PM
> > > Subject: ccboot 2 bgp AS3 challenge
> > >
> > >
> > > > In the configuration of R6, there is no route to R5's ethernet.
> > > Therefore, R7
> > > > has no route to the next-hop router, and does not populate it's
table.
> > In
> > > the
> > > > instructions, you are given the opportunity to add a static default
> > route
> > > to
> > > > R5 to get the bgp routes to R7.
> > > >
> > > > I found 2 other ways to accomplish this without that static default
> > route,
> > > > keeping in mind that the static route solution may not be viable in
> the
> > > lab
> > > > exam. Is anyone working that lab and would you like to take a stab
at
> > it?
> > > > (all of the solutions are elegant and require very little thought)
> > > >
> > > > -e-



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:42 GMT-3