From: Jason Gardiner (gardiner@xxxxxxxxxx)
Date: Wed Dec 12 2001 - 11:35:39 GMT-3
I'll have to disagree. It works best with eigrp, but I've had it working
with OSPF and RIP as well. Snapshot only works with Distance vector.
On Tuesday 11 December 2001 06:51 pm, Yifan (Eric) Wang wrote:
> dailer watch only works with igrp and eigrp.
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Basel Tashkandi
> Sent: Saturday, December 08, 2001 9:05 PM
> To: peter brown
> Cc: ccielab@groupstudy.com
> Subject: Re: dialer watch
>
>
> Hi Peter
> I gather from the information you have sent is that you are using NBMA on
> your serials with full mesh most probably.
> I am not sure if dialer watch here can fit as you will always have the
> route in your routing table even when one of the routers fails.
> Are you specifically asked to use Dialer Watch? or you can use something
> else like backup interface?
>
> At 23:38 08/12/2001 +0000, peter brown wrote:
> >Hello
> >
> >Does anybody have a working config sample on dailer watch. The one in cco
> >does not address my situation. I have 3 routers r1, r2, r3. All are in
> >ospf area 0. r1 and r3 have isdn connection as backup incase s0 from r3 to
> >r1 fails. I want to use dialer watch on r3 to call r1 incase its s0 fails.
> >
> >Thanks or your help
> >
> >Browm
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:42 GMT-3