From: EA Louie (elouie@xxxxxxxxx)
Date: Wed Dec 12 2001 - 04:53:59 GMT-3
I don't understand the abbreviations...
IRDP? internal route distribution protocol?
GDP? general data processing?
----- Original Message -----
From: "Chris Larson" <clarson52@home.com>
To: "EA Louie" <elouie@yahoo.com>; <ccielab@groupstudy.com>
Sent: Tuesday, December 11, 2001 8:00 PM
Subject: Re: ccboot 2 bgp AS3 challenge
> Well, I will take a stab at one of the solutions I can think of off the
top
> off my head. I think this would work, I will have to put it to the test in
> the lab.
>
> IRDP on R5 GDP on R6 facing R5. IRDP on R6 facing R7 GDP on R7 facing R6.
>
>
> ----- Original Message -----
> From: "EA Louie" <elouie@yahoo.com>
> To: <ccielab@groupstudy.com>
> Sent: Tuesday, December 11, 2001 8:57 PM
> Subject: ccboot 2 bgp AS3 challenge
>
>
> > In the configuration of R6, there is no route to R5's ethernet.
> Therefore, R7
> > has no route to the next-hop router, and does not populate it's table.
In
> the
> > instructions, you are given the opportunity to add a static default
route
> to
> > R5 to get the bgp routes to R7.
> >
> > I found 2 other ways to accomplish this without that static default
route,
> > keeping in mind that the static route solution may not be viable in the
> lab
> > exam. Is anyone working that lab and would you like to take a stab at
it?
> > (all of the solutions are elegant and require very little thought)
> >
> > -e-
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:42 GMT-3