From: EA Louie (elouie@xxxxxxxxx)
Date: Mon Dec 10 2001 - 15:42:31 GMT-3
Key Point - MZMAKER images run from RAM, so you'll have to have enough
memory for the
1. image to uncompress into RAM
2. router to operate in the remaining RAM
Case in point to share: I tried a 13M compressed image (12.1 IP/IPX/AT/DEC
Plus) on a 8/16 router (no shared memory soldered on the board, so really
8/14/2). When it uncompressed, there was not enough RAM to boot the image,
so I had to back down to the next smaller compressed image (12.1
IP/IPX/AT/DEC).
good luck!
----- Original Message -----
From: "Reinhold Fischer" <Reinhold.Fischer@gmx.net>
To: "Kenneth Leon" <klean@mindspring.com>
Cc: <ccielab@groupstudy.com>
Sent: Monday, December 10, 2001 9:33 AM
Subject: RE:Compressing images to load onto cisco 2500 router
> Hi Ken,
>
> here is the link to MZMAKER:
>
> http://www.mcseco-op.com/mzmaker.htm
>
> mzmaker seems not to be long-filename aware. So rename your image that
> you want to compress to something that fits into the old DOS 8.3 naming
> scheme. You can rename it back after mzmaker did its job.
> I have used mzmaker in the past to run 12.0 Enterprise IOS on
> my 2500 series routers with 8m flash / 16m dram. For IOS12.1 i had
> upgraded my routers to 16m flash.
>
> hth
>
> Reinhold
>
> On Mon, 10 Dec 2001, Kenneth Leon wrote:
>
> > Hello Group,
> >
> > Looking for support on the following. Is there a way to compress and
image
> > and store in cisco 2500 8 meg flash memory without using a UNIX utility?
> >
> > Got eight 2500 series routers with 8 meg of flash. To run IPSec, ISIS
and
> > some other protocols as necesary for the CCIE lab exam preparation. The
IOS
> > images or images that support these technologis require 16 meg flash.
> >
> > Don't have any UNIX or Linux machines. Just windows. It there software
that
> > can compress within a Windos OS (win 98)?
> >
> > Thank you.
> >
> > Ken L.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:41 GMT-3