From: Basel Tashkandi (basel@xxxxxxxxxxxxx)
Date: Sat Dec 08 2001 - 20:20:15 GMT-3
when you press the return key do you get any kind of response or nothing at
all.
If you do then you might want to try changing your com port speed
If this doesn't work try the auto-install feature to put some configuration
on the router
At 18:26 08/12/2001 -0300, Phil wrote:
> Hans,
>You can try to connect this router to another router via ethernet or
>serial and if the interfaces are not shutdown and cdp is running you'll be
>able to see the router as a cdp neighbor.
>
> Hans <yyao@sympatico.ca> escreveu: Hi there,
>
>My console of Cisco 2507 router is not working(it is working fine
>yesterday). When I power up the router, nothing shows up. I have checked the
>console cable with other routers, it is working fine. I connect the console
>cable to the aux port when I power up the router, a "p" displayed then
>nothing shows up anymore. When I did the same thing to other working router,
>"o" is displayed and then it enters into prompt mode. There is not ip
>address assigned on any of the interfaces, so console/aux is the only way
>for me to accesss the router.
>
>Can anyone please help me,
>
>
>
>Thanks a million.
>
>Hans
>---------------------------------
>Yahoo! GeoCities
>Tenha seu lugar na Web. Construa hoje mesmo sua home page no Yahoo!
>GeoCities. I facil e gratis!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:40 GMT-3