SERIAL CARDS ON 1603

From: Thompson, Kenny (K.) (kthomp40@xxxxxxxx)
Date: Thu Dec 06 2001 - 07:08:47 GMT-3

• Next message: Craig King: "Re: ISIS L1 router's default route"
• Previous message: Parrish, Ben: "RE: Important: Read -only flash on 2500 routers"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Dear All,

I have installed serial cards (WIC-1T) on all my 1603 and 1 1603R. For some str
ange reason, the serial link is seen when using the show ver command. But when
I configure the serial interfaces and issue a no shut, i get this error message
 scrolling down like a yoyo.

ASSERTION FAILED: file "../src-36-c1600/if_c1600_cpai_init.c", line 184
ASSERTION FAILED: file "../src-36-c1600/if_c1600_cpai_init.c", line 184
ASSERTION FAILED: file "../src-36-c1600/if_c1600_cpai_init.c", line 184
ASSERTION FAILED: file "../src-36-c1600/if_c1600_cpai_init.c", line 184
ASSERTION FAILED: file "../src-36-c1600/if_c1600_cpai_init.c", line 184
ASSERTION FAILED: file "../src-36-c1600/if_c1600_cpai_init.c", line 184
ASSERTION FAILED: file "../src-36-c1600/if_c1600_cpai_init.c", line 184
ASSERTION FAILED: file "../src-36-c1600/if_c1600_cpai_init.c", line 184

Can some help please. I am running 12.0 or some and 11.0 on some. I have checke
d IOS compatibilty and memory requirements and that seems to be in place.

Rgds

Kthomp40

• Next message: Craig King: "Re: ISIS L1 router's default route"
• Previous message: Parrish, Ben: "RE: Important: Read -only flash on 2500 routers"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:39 GMT-3