From: Sukhdev (sukhdev@xxxxxxxxxxxxxxxxx)
Date: Thu Dec 06 2001 - 02:46:27 GMT-3
Here is the sample dial plan config.
dial-peer voice 601 pots
destination-pattern 60T
direct-inward-dial
port 0:D
As you can see, the machine just dials all numbers after the "60" prefix.
This is as intended but I want to block certain numbers from being dialed
out.
Cheers,
S Dave
----- Original Message -----
From: "rsevier" <rsevier@zealousolutions.com>
To: "Sukhdev" <sukhdev@first-engr.com.sg>
Sent: Wednesday, December 05, 2001 9:44 PM
Subject: RE: Blocking egress numbers on AS5300 (OT)
> could you pls send over your config. I may have a way.
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Sukhdev
> Sent: Sunday, December 02, 2001 7:59 PM
> To: ccielab@groupstudy.com
> Subject: Blocking egress numbers on AS5300 (OT)
>
>
> Hi Guys,
>
> Apologies as this question is a little OT. I have an AS5300 that is only
> terminating traffic into a particular city. The machine is not connected
to
> a
> billing sytem, Gatekeeper or authentication server. In other word, its
just
> connected raw to the Internet. A remote softswitch from US directs calls
to
> this gateway. The question I have is how can I block a telephone number
from
> being called (citywide) from the gateway, if I dont have access to the
> remote
> softswitch nor the remote billing system. Is there an access list or
> something
> equivalent that can be used for blocking telephone numbers on the AS5300.
>
> Appreciate your responses.
>
>
> Regards,
>
> S Dave
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:39 GMT-3