From: Basel Tashkandi (basel@xxxxxxxxxxxxx)
Date: Wed Dec 05 2001 - 13:45:28 GMT-3
Hi Xujing,
You need both of them to start authenticating routing updates between two
OSPF neighbors.
ip ospf authn mes
will enable authentication under that interface
ip ospf mess 1 md5 cisco
is basically setting the authentication parameters
remember you need to have another line also under the "router ospf pid"
Regards
At 00:11 06/12/2001 +0800, xujing@31942.org wrote:
>Hi, ccielab#!
>
>I search the cisco web site for the "ospf md5 authentication". I find the
>following config:
>
>inter f0/0
>ip add 1.1.1.1 255.255.255.0
>ip ospf mess 1 md5 cisco
>
>but I also find the "ip ospf authentication mess" from the IOS command list.
>
>If I also use these two command in my config, I can not find what's the
>difference.
>
>who can tell me whether I need add the "ip ospf authentication mess" to my
>config?
>
>Thanks a lot!!!
>
>
>
>
>
>Best Regards!!!
>
>xujing@e-ccsi.org
>2001-12-06
>
>**********************
>CCSI:21130
>CCNP/CCDP/CNE4/CLP
>**********************
>
>[GroupStudy.com removed an attachment of type image/gif which had a name
>of FOX.GIF]
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:38 GMT-3