From: SFeldberg@xxxxxxxxxxxxx
Date: Tue Dec 04 2001 - 15:40:11 GMT-3
No way for EIGRP to calculate a metric for the OSPF routes. No metric =
infinity = inaccessible. Remember that IGRP/EIGRP require the application
of 5 metric values during redistribution, or to have a default-metric
applied to the routing process in config-router mode.
Steve
Liu
Jianxin-qch1927 To: ccielab@groupstudy.com
<Jianxin.Liu@in cc:
visix.com> Subject: why no FD in eigrp
Sent by:
nobody@groupstu
dy.com
12/04/2001
03:55 AM
Please respond
to Liu
Jianxin-qch1927
Group,
I use a simple topology as follow:
R1 R2
| |
------------------------- LAN
|
R3
R1 and R2, R3 run OSPF on their ethernet interface.
R1 and R2 also run eigrp on the Etherent interface.
Then I redistribute OSPF into eigrp on R1 and hope to see these routes on
R2's routing table.
But I only saw the OSPF route on R2.
R2#show ip route
O IA 10.32.4.32/27 [110/11] via 199.5.211.60, 00:06:21, Ethernet0
O IA 10.32.5.32/27 [110/12] via 199.5.211.50, 00:06:21, Ethernet0
[110/12] via 199.5.211.51, 00:06:21, Ethernet0
R2#show ip eigrp top
P 10.32.4.32/27, 0 successors, FD is Inaccessible
via 199.5.211.8 (25651200/25625600), Ethernet0
P 10.32.5.32/27, 0 successors, FD is Inaccessible
via 199.5.211.8 (25651200/25625600), Ethernet0
Notes the FD in the eigrp is inaccessible here. So I think this is the
reason why the eigrp route can
not insert into the routing table. But I do not know why FD inaccessible?
Can anyone help?
Thanks,
Jianxin
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:37 GMT-3