From: Jason Gardiner (gardiner@xxxxxxxxxx)
Date: Mon Dec 03 2001 - 10:50:43 GMT-3
I've had some issues where I have been unable to ping a local/remote
router interface. Ordinarily this has occured with Frame and Dialer
interfaces. A debug ip packet shows encapsulation failed, which would
indicate that there is no mapping between the layer 2 and 3. Once the
mapping is in place, everything works as it should.
Okay, now does anyone know why I would see this on an Ethernet
interface? Both the local and remote interfaces are on the same VLAN
(and are the only devices on it) and everything looks okay from the
switch perspective as far as I can tell (i.e. neither port is disabled
and are showing pretty normal status operationally). Any pointers would
be appreciated.
-- Thanks,Jason Gardiner Supervisor, Engineering Services Sprint <Insert Division Name>
"You can swim all day in the Sea of Knowledge and still come out completely dry. Most people do."
- Norton Juster
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:36 GMT-3