From: Albert Lu (albert_ccie@xxxxxxxxx)
Date: Sat Dec 01 2001 - 06:17:17 GMT-3
Dane,
Yes, that looks like the only way to do it in IOS 12.1.
I'm not sure what the proctors think about using secondary addresses, that
may be a concern.
You also have to watch out when doing redistribute connected, that it will
take over the interfaces that IGRP/EIGRP is running on since it has a lower
admin distance. So interfaces that have are not part of OSPF will all be
redistributed by the redistribute connected, even the ones where IGRP/EIGRP
is running on.
Albert
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Dane Clemons
Sent: Saturday, December 01, 2001 7:44 AM
To: Vincent Zhang
Cc: ccielab@groupstudy.com
Subject: Re: AGAIN! IGRP OSPF redis
Vicent, put a secondary interface on a LAN interface, or add another
loopback
interface and make it apart of the
172.16.0.0network, for example you are
using 172.16.2.1 /28 put 172.16.2.17 /28 on the loopback or secondary
interface.
Do not put the loopback or secondary interface in the OSPF process, then do
redistribute connected, this should work.
Dept: Networking Phone #: (850) 297-2522
Ext.274
Please respond to "Vincent Zhang" <vincentzhang@yahoo.com>
|--------------------------------------->
| |
|--------------------------------------->
>---------------------------------------|
| |
>---------------------------------------|
|--------------------------------------->
| To: |
|--------------------------------------->
>---------------------------------------|
| ccielab@groupstudy.com |
>---------------------------------------|
|--------------------------------------->
| cc: |
|--------------------------------------->
>---------------------------------------|
| (bcc: Dane Clemons/Waldec) |
>---------------------------------------|
|--------------------------------------->
| |
|--------------------------------------->
>---------------------------------------|
| |
>---------------------------------------|
|--------------------------------------->
| Subject: |
|--------------------------------------->
>---------------------------------------|
| AGAIN! IGRP OSPF redis |
>---------------------------------------|
[IMAGE]
Hi All,
Pls consider the following simple topology for redis OSPF into IGRP.
s0 s1
R2----------------------R1---------------------
172.16.1.0/24 172.16.2.0/28
R2 runs IGRP only
R1 runs IGRP on S0 and OSPF on S1, and there is a big OSPF cloud attached
from
S1.
you are trying to redis ospf into igrp, in this case, I am talking how to
redis the 172.16.2.0/28 into R1.
I know in ios 12.1, the normal "redis connect" and "summary" way doesn't
work, but I also hear about that the "second address" works, any one could
show me a light about where to put the secondary address.
Thanks, V
(Embedded image moved to file: pic06019.pcx)
[GroupStudy.com removed an attachment of type application/octet-stream which
had a name of pic06019.pcx]
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:32:35 GMT-3