RE: PPP callback with one-way authentication

From: Jason Graun (jgraun@xxxxxxxxxx)
Date: Thu Nov 29 2001 - 17:19:27 GMT-3

Next message: Jason Graun: "RE: SNA: 0x0C0D versus 0x0D0D"
Previous message: Brian Hescock: "follow-up: filtering explorers to a specific host"
Maybe in reply to: Jason Graun: "PPP callback with one-way authentication"
Next in thread: fwells12: "Re: PPP callback with one-way authentication"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Yes, thanks for the help, I remember now configuring the device that
way. I has been a little while for me doing ISDN labs I am getting
ready for the alb so I would to make sure that all the off-set ISDN
stuff is ok in my head.

Thanks again

-----Original Message-----
From: Tu Nguyen [mailto:tunguyen@juniper.net]
Sent: Thursday, November 29, 2001 2:16 PM
To: Jason Graun; ccielab@groupstudy.com
Subject: RE: PPP callback with one-way authentication

I belive you'll need to use ppp chap authentication callin command on
the calling router, this will not authenticate the called router.

http://www.cisco.com/warp/public/471/config-pap.html

-----Original Message-----
From: Jason Graun [mailto:jgraun@theocc.com]
Sent: Thursday, November 29, 2001 11:14 AM
To: ccielab@groupstudy.com
Subject: PPP callback with one-way authentication

Does any body know of any way to setup up ppp callback with chap so that
only one side of the connection authenticates the connection?

Thanks

Jason Graun CCNP CCDA MCSE
Network Engineering

Next message: Jason Graun: "RE: SNA: 0x0C0D versus 0x0D0D"
Previous message: Brian Hescock: "follow-up: filtering explorers to a specific host"
Maybe in reply to: Jason Graun: "PPP callback with one-way authentication"
Next in thread: fwells12: "Re: PPP callback with one-way authentication"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:26 GMT-3