From: Tu Nguyen (tunguyen@xxxxxxxxxxx)
Date: Thu Nov 29 2001 - 17:12:21 GMT-3
on the cat2900, assign the port to the appropriate vlan.
Example:
int fa0/1
switchport mode access
switchport access vlan 2
int fa0/2
switchport mode access
switchport access vlan 3
int fa0/24 (Uplink to Cat 5000)
switchport mode trunk
switchport trunk en isl
Tu
-----Original Message-----
From: Guy Russell [mailto:guyman@pdq.net]
Sent: Thursday, November 29, 2001 12:37 AM
To: ccielab@groupstudy.com
Subject: VTP Server
Ok, I have lost alot of hair on this one. I usually dont ask the group
questions, but After searching Cisco for days, and poking around the
switches,
I am stumped...
Lets say you have one Cat 5000 and a couple of 2900 series switches.
You set up your VTP domain, making your 5000 the server and the others
your
clients... Now configuring VLANS propogates to the clients no problem.
But how
do you assign different ports on the different switches to the various
vlans???
or can you only have all the port 1s on vlan 5 etc....????
Doesnt make sense...
This scenario could be all 2900s or whatever, just tossed an example
out.
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:26 GMT-3