From: Palacios, Gonzalo (gpalacios@xxxxxxxxxxxxxxxxx)
Date: Thu Nov 29 2001 - 17:03:20 GMT-3
you need a:
interface fast 0/3
switchport access vlan 5
that's it.
Well, as long as VTP is working fine.
_ you might need a 2924XL-EN for this... (or 3500's)
-----Original Message-----
From: Guy Russell [mailto:guyman@pdq.net]
Sent: Thursday, November 29, 2001 3:37 AM
To: ccielab@groupstudy.com
Subject: VTP Server
Ok, I have lost alot of hair on this one. I usually dont ask the group
questions, but After searching Cisco for days, and poking around the
switches,
I am stumped...
Lets say you have one Cat 5000 and a couple of 2900 series switches.
You set up your VTP domain, making your 5000 the server and the others your
clients... Now configuring VLANS propogates to the clients no problem. But
how
do you assign different ports on the different switches to the various
vlans???
or can you only have all the port 1s on vlan 5 etc....????
Doesnt make sense...
This scenario could be all 2900s or whatever, just tossed an example out.
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:26 GMT-3