From: Church, Chuck (cchurch@xxxxxxxx)
Date: Thu Nov 29 2001 - 16:34:57 GMT-3
Dan,
This router should run the same code that any other 2500s do.
Sounds like you have some special image on there that doesn't support those
protocols, kind of like trying to run ISIS on a non-Enterprise image. Put a
recent 12.0 IP only image on there (check the memory req. first!), and it
should work.
Chuck
P.S. 16 mb of RAM should cost about $20 these days. You'll need it anyway
if you want to run DLSW.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
DAN DORTON
Sent: Thursday, November 29, 2001 1:38 PM
To: brian@5g.net; ccielab@groupstudy.com
Subject: RE: 2509AS
This is an 2509 remote access server.
When I try to configure OSPF, or BGP on the router it says unknown routing
protocol.
Although I can configure RIP, IGRP, or EIGRP.
Memory has nothing to do with it.
When I do a router ? under the config it shows OSPF & BGP, but it will not
allow you to configure them.
I repeat TAC says these two protocols are unsupported on this unit.
Thanks,
>>> "Brian Dennis" <brian@5g.net> 11/29/01 12:12PM >>>
Dan,
A 2509 will support BGP and OSPF. I think TAC must not have understand what
you were asking.
Brian Dennis, CCIE #2210 (R&S)(ISP/Dial) CCSI #98640
5G Networks, Inc.
bdennis@5g.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
DAN DORTON
Sent: Thursday, November 29, 2001 9:41 AM
To: DAN DORTON; ccielab@groupstudy.com
Subject: Re: 2509AS
Nevermind. TAC answered my question.
Apparently the BGP & OSPF processes are too CPU intensive for that unit &
are unsupported.
Thanks anyways,
>>> "DAN DORTON" <DHSTS68@dhs.state.il.us> 11/29/01 11:13AM >>>
I am having trouble finding an IOS that supports OSPF & BGP routing on my
2509AS.
It only has 8MB flash & 4MB ram.
Am I missing something here? It will use RIP & EIGRP.
Thanks in advance.
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:25 GMT-3