From: Swink, Dave (DSwink@xxxxxxxxxxxxx)
Date: Thu Nov 29 2001 - 15:56:11 GMT-3
Dan,
I just configured BGP on the 2509 in my lab and added a couple of networks
to the process.
This sounds like a miscommunication. Can you give us the commands you are
using to config BGP?
Dave Swink
-----Original Message-----
From: DAN DORTON [mailto:DHSTS68@dhs.state.il.us]
Sent: Thursday, November 29, 2001 12:38 PM
To: brian@5g.net; ccielab@groupstudy.com
Subject: RE: 2509AS
This is an 2509 remote access server.
When I try to configure OSPF, or BGP on the router it says unknown routing
protocol.
Although I can configure RIP, IGRP, or EIGRP.
Memory has nothing to do with it.
When I do a router ? under the config it shows OSPF & BGP, but it will not
allow you to configure them.
I repeat TAC says these two protocols are unsupported on this unit.
Thanks,
>>> "Brian Dennis" <brian@5g.net> 11/29/01 12:12PM >>>
Dan,
A 2509 will support BGP and OSPF. I think TAC must not have understand what
you were asking.
Brian Dennis, CCIE #2210 (R&S)(ISP/Dial) CCSI #98640
5G Networks, Inc.
bdennis@5g.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
DAN DORTON
Sent: Thursday, November 29, 2001 9:41 AM
To: DAN DORTON; ccielab@groupstudy.com
Subject: Re: 2509AS
Nevermind. TAC answered my question.
Apparently the BGP & OSPF processes are too CPU intensive for that unit &
are unsupported.
Thanks anyways,
>>> "DAN DORTON" <DHSTS68@dhs.state.il.us> 11/29/01 11:13AM >>>
I am having trouble finding an IOS that supports OSPF & BGP routing on my
2509AS.
It only has 8MB flash & 4MB ram.
Am I missing something here? It will use RIP & EIGRP.
Thanks in advance.
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:25 GMT-3