From: Don Rogers (drogers@xxxxxxxxxxx)
Date: Wed Nov 28 2001 - 00:45:57 GMT-3
interface ATM1/1/0.200 multipoint
ip address 2.2.2.1 255.255.255.0
no ip directed-broadcast
pvc test 2/200
protocol ip inarp
"Treptow, Georg" wrote:
> Oops, the new way would be via inarp and an arpserver I believe, the way
> you
> had it in your config (RFC1577).
>
> Georg Treptow
>
> -----Original Message-----
> From: David Vu [mailto:dd_vu@yahoo.com]
> Sent: Tuesday, November 27, 2001 7:56 PM
> To: ccielab@groupstudy.com
> Subject: Bootcamp # 20 Classical IP over ATM -- the new way.
>
> I am just curious. How do you configure a classical IP over ATM using
> the
> "new way"? Bootcamp lab 20 has the old way.
>
> I found this link http://www.cisco.com/warp/customer/121/ipoveratm.html
> . Is the configuration below enough? Am I missing anything else?
>
> interface ATM1/1/0.200 multipoint
> ip address 2.2.2.1 255.255.255.0
> no ip directed-broadcast
> pvc 2/200
> inarp 5
> protocol ip 2.2.2.2 broadcast
>
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:24 GMT-3