From: tom cheung (tkc9789@xxxxxxxxxxx)
Date: Tue Nov 27 2001 - 15:22:55 GMT-3
Clear ip ospf proc
>From: "Michael Jia" <mjia@cisco.com>
>Reply-To: "Michael Jia" <mjia@cisco.com>
>To: <ccielab@groupstudy.com>
>Subject: command change OSPF routerID ?
>Date: Tue, 27 Nov 2001 10:03:56 -0800
>
>Hi,
>
>Is there a command to force the router to reset OSPF router ID without
>rebooting the router?
>
>The scenerio is :
> 1. define the ospf process
> router ospf 10
> ! e0's address
> network 192.168.0.1 0.255.255.255 area 0
>
> 2. define a loopback
> ! the ospf router ID suppose-to-be
> interface loopback 0
> ip address 100.100.100.100 255.255.255.0
> 3. add loopback into ospf
> router ospf 10
> network 100.0.0.0 0.255.255.255 area 0
>
>Now the router using e0's ip as OSPF router ID. How to
>make it change the ID to lo0's ip?
>
>I know reboot the router will do it. But is there an IOS
>command to do the same job?
>
>Thanks a lot.
>--
>Michael Jia
>Software Eng, INS - Security & VPN Mgmt Serv
>Cisco Systems, Inc.
>Work: (408) 527-4632
>Fax: (408) 527-7570
>EMail: mjia@cisco.com
>
>Cisco - Empower the Internet Generation.
>
>[GroupStudy.com removed an attachment of type text/x-vcard which had a name
>of Michael Jia.vcf]
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:23 GMT-3