From: Murphy, Brennan (Brennan_Murphy@xxxxxxx)
Date: Tue Nov 27 2001 - 13:39:32 GMT-3
I've got a 2500 plugged into a Cat4003 and I can't seem
to get any traffic between that the router and any other
devices on the switch. A show interface indicates the
router is only detecting broadcasts. What could be
causing this issue?
saort1#sh int e 0
Ethernet0 is up, line protocol is up
Hardware is Lance, address is 00e0.b05b.026b (bia 00e0.b05b.026b)
Internet address is 10.10.88.251 255.255.255.0
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, rely 255/255, load 1/255
Encapsulation ARPA, loopback not set, keepalive set (10 sec)
ARP type: ARPA, ARP Timeout 4:00:00
Last input 0:00:25, output 0:00:05, output hang never
Last clearing of "show interface" counters 0:12:58
Output queue 0/40, 0 drops; input queue 0/75, 0 drops
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
41 packets input, 4152 bytes, 0 no buffer
Received 41 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 input packets with dribble condition detected
96 packets output, 8880 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets, 0 restarts
0 output buffer failures, 0 output buffers swapped out
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:23 GMT-3