From: Joseph Ezerski (jezerski@xxxxxxxxxxxx)
Date: Mon Nov 26 2001 - 13:05:39 GMT-3
There is a great link on CCO that is also on the Doc CD. It gives you a
really good example of custom queueing with fixed frame sizes and
percentages. It was hidden, but it is there. Here is the CCO link. Hope
this helps...
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/qos_
c/qcprt2/qcdconmg.htm#xtocid840029
-Joe
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
McCallum, Robert
Sent: Sunday, November 25, 2001 11:58 PM
To: 'sanjay'; ccielab@groupstudy.com
Subject: RE: Custom Queue List question
I think we need to know the average frame size for each protocol as well
before any "real" calculations can be made
-----Original Message-----
From: sanjay [mailto:ccienxtyear@hotmail.com]
Sent: 25 November 2001 23:35
To: ccielab@groupstudy.com
Subject: Custom Queue List question
I need to setup queueing to assign 25% of bandwidth to IP, IPX, Telnet and
default queue. I'll assign the queue list to a serial interface running at
T1
speed. Can anyone provide a sample config.
thanks,
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:22 GMT-3