From: Matt Smith (matt-n-donna@xxxxxxxxxxxxxx)
Date: Sun Nov 25 2001 - 21:52:14 GMT-3
Try interface virtual-tokenring 0
This will create a virtual token ring that will allow you to issue the
source-bridge commands to practice with. The only gotcha is that OSPF does
not really like the interfaces and assume them to be loopbacks so they will
always appear as a /32 in ospf. Some code revs I have found do not support
putting IP addresses on the virtual interfaces at all but I can not remember
which ones they were. I dont have any TR routers in my practice lab but I
did pretty much all the bootcamp labs with the virtual-token ring
interfaces. worst case you will need to do some area range commands to make
up for the ospf problems, but hey..practice is practice right? Good luck.
Matt Smith
----- Original Message -----
From: "Davis, David" <DDavis@foxgal.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, November 25, 2001 11:33 AM
Subject: DLSW w/out To0 ?
> Sorry for the dumb question but-
>
> I want to practice DLSW variations but do not have a Token Ring
> interface on my routers.
>
> What types of DLSW can I do and what types cannot I do?
>
> For the types that I cannot do, is there anyway around it? (A virtual
> token interface, or something? - I doubt it but thought that it was
> worth asking).
>
> Thanks,
> David
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:22 GMT-3