From: sanjay (ccienxtyear@xxxxxxxxxxx)
Date: Sun Nov 25 2001 - 20:31:42 GMT-3
Yep that worked. I had 10.0.0.0 255.255.255.0 and it wasn't working.
thanks,
Sanjay
----- Original Message -----
From: "John Neiberger" <neiby@excite.com>
To: "sanjay" <ccienxtyear@hotmail.com>; <ccielab@groupstudy.com>
Sent: Sunday, November 25, 2001 2:49 PM
Subject: Re: RIP summary
> One possibility I can think of is to add the following to the advertising
> router at the interface level:
>
> ip summary-address eigrp xyz 10.0.0.0 255.0.0.0
>
> Is that an option in your scenario?
>
> John
>
> On Sun, 25 Nov 2001 14:30:29 -0800, sanjay wrote:
>
> | Need some help...
> |
> | I have a router with 2 loopback interface configured for RIP. Net
> 10.1.1.0/24
> | and 10.1.2.0/24. The same router is also running EIGRP. I have
> redistributed
> | RIP into EIGRP and now I can see the two RIP networks on all other
> routers.
> | The question is, how to summarize the two RIP routes into one route so
> all the
> | other routers just see one route to net 10.0.0.0.
> |
> | thanks.
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:22 GMT-3