RE: IPX DDR with Dialer Profiles

From: Dennis #6 (vacant@xxxxxxxx)
Date: Sat Nov 24 2001 - 11:28:50 GMT-3

• Next message: Edide Parra: "Anyone out there attempting the C&S CCIE"
• Previous message: Ben-Shalom, Omer: "BGP neighbor connections"
• Maybe in reply to: Yorgos Katsikogiannis: "IPX DDR with Dialer Profiles"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Absolutely it's possible... it take a little more than the config you
listed but its possible...

Dennis

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Yorgos Katsikogiannis
Sent: Saturday, November 24, 2001 7:22 AM
To: ccielab@groupstudy.com
Subject: IPX DDR with Dialer Profiles

Hi all,

has anybody tried to configure IPX DDR using dialer profiles (not any
rotaries) ? Is this possible ?

The configuration should be sth like .

interface Dialer1
 no ip address
 encapsulation ppp
 dialer remote-name WG4R3
 dialer pool 1
 dialer string 1111
 dialer max-call 4096
 dialer-group 2
 ipx network 444
 no cdp enable
 ppp authentication chap
!

Tia,

Yorgos

[GroupStudy.com removed an attachment of type application/ms-tnef which had
a name of winmail.dat]

• Next message: Edide Parra: "Anyone out there attempting the C&S CCIE"
• Previous message: Ben-Shalom, Omer: "BGP neighbor connections"
• Maybe in reply to: Yorgos Katsikogiannis: "IPX DDR with Dialer Profiles"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:22 GMT-3