From: Peter Whittle (peter@xxxxxxxxxxxxxxxxxxxxxxxxxxx)
Date: Wed Nov 21 2001 - 07:46:07 GMT-3
Jason,
If you want a pointer then look on cco under the ccie certification area
for Multiservice recertification blueprint there were a significant
number of Voip URLs last time that I looked.
Peter
In message <5.0.0.25.2.20011121080017.04b78da8@lagos.omnes.slb.com>,
Ademola Osindero <osindero@lagos.sns.slb.com> writes
>Jason,
>
>There is a good documentation on this topic on the Cisco website. It is
>titled Understanding Dial Peer and Dial Plan Structures. I guess you could
>search for it. It covers almost all the intricacies of Dial configuration.
>
>Ademola
>
>
>
>At 11:08 AM 11/20/2001 -0800, fwells12 wrote:
>>I am reading Integrating Voice and Data Networks by Keagy. It is very good.
>>
>>
>>----- Original Message -----
>>From: "Jason Graun" <jgraun@theocc.com>
>>To: <ccielab@groupstudy.com>
>>Sent: Tuesday, November 20, 2001 11:00 AM
>>Subject: RE: Can someone verify this voice config please.
>>
>>
>> > Do You have any documentation on that feature of voice?
>> >
>> > Thanks
>> >
>> > Jason
>> >
>> > -----Original Message-----
>> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>> > Andy Cuberly
>> > Sent: Tuesday, November 20, 2001 8:00 AM
>> > To: 'fwells12'; ccielab@groupstudy.com
>> > Subject: RE: Can someone verify this voice config please.
>> >
>> > Almost there - You need to insert a single "." before the capital "T" in
>> > the
>> > destination pattern in the VOIP dial peer.
>> >
>> > Looks like this:
>> >
>> > destination-pattern .T
>> >
>> > Also - You need to add a valid extension number in the Pots dial peer on
>> > the
>> > destination pattern line.
>> >
>> > example:
>> >
>> > R1
>> > dial-peer voice 1 pots
>> > destination-pattern 111
>> > port 1/0/0
>> >
>> > dial-peer voice 2 voip
>> > destination-pattern .T
>> > session target ipv4:x.x.x.x (IP address of R2)
>> >
>> >
>> > The rest looks good.
>> >
>> > Andy Cuberly
>> > CCIE #8386
>> >
>> >
>> >
>> > -----Original Message-----
>> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>> > fwells12
>> > Sent: Tuesday, November 20, 2001 12:50 AM
>> > To: ccielab@groupstudy.com
>> > Subject: Can someone verify this voice config please.
>> >
>> >
>> > I don't have voice access to try this. The object of the excersize is
>> > to be
>> > able to use any number to dial over frame-relay to another phone and
>> > have
>> > that
>> > phone be able to dial back using any number too.
>> >
>> >
>> > R1-----------frame-relay ------------R2
>> >
>> > R1
>> > dial-peer voice 1 pots
>> > destination-pattern T
>> > port 1/0/0
>> >
>> > dial-peer voice 2 voip
>> > destination-pattern T
>> > session target ipv4:x.x.x.x
>> >
>> > R2
>> > dial-peer voice 1 pots
>> > destination-pattern T
>> > port 1/0/0
>> >
>> > dial-peer voice 2 voip
>> > destination-pattern T
>> > session target ipv4:x.x.x.x
>Osindero Ademola
>Schlumberger Network Solutions
>Tel: 234 1 261 0446 Ext 5427
>Fax 234 1 262 1034
>email:osindero@lagos.sns.slb.com
-- Peter Whittle
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:20 GMT-3